Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

In Sweden, grass is the single largest crop grown. Nearly 1 000 000 Ha grows on the fields, this is primarily used as feed for livestock. To get a good seed, you need to handle the crop carefully from planting to delivery. The part that I have been interested in, is how to dry the harvested seed with out destroying the growth in the small seed. This is very easily done if you aren?t careful during the drying period.

Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Water constructions - as a design element in public spaces is the title of this Master thesis, with a focus on waters function and meaning in the urban environment. By way of introduction, mans relationship to places is described and the factors that contribute to the reality that we prefer some places more than others. A good place to stay is open but well defined, gives protection, offers a good view and is varying in topography and vegetation, together with contents of single landscape elements like visible water. This study then continues to discuss mans relationship to water and its means for our wellbeing. Despite the fact that people have a different relations to water due to personality, background and age, it?s an element that raises positive feelings, interest and aesthetic pleasure for most people.

The corn plant came to Europe with Christopher Columbus in the 14th century and have ever since bin cropped here, but corn haven?t bin very common in Scandinavia until recently. The mainly use for this crop silage but even corn for grain is cropped in Europe. Corn for grain is a common part of feed in beef and chicken farming. In Sweden corn for grain is pretty rare but almost 1000 hectares are used for this crop, Lantmännen Sverige is the biggest buyer of corn at the moment.

This report is about the experiments with mixing of the separated water and the vacuum pump seal water at Hellisheiði power plant. This is done to prevent silica scaling and clogging in pipes and reinjection wells as well as eliminating vacuum pump seal water from the plant. The experiments were done in four stages: the first stage comprised of tests with different flows of separated water at 70°C, the second stage was carried out by mixing the separated water at 70°C and the seal water with different amounts of the seal water, the third and the fourth stages were like the first and second but with the separated water at 120°C. The results show that this method is good if the mixture is around 50/50 separated water and seal water, to control the silica scaling in the separated water and to be able to reinject the seal water with the separated water. This does not eliminate the silica scaling in all of the separated water because the amount of separated water is much more than the amount of seal water that comes from the plant. .

ABSTRACTIntroduction: Preoperative hand disinfection aims to prevent surgical site infections. After the preparing hand wash, drying is performed using an aseptic technique. It?s important to dry hands thoroughly in order to achieve the full effect of the alcohol based hand disinfection. Due to the lack of a evidence-based guideline on this procedure, the hand drying techniques differ among operating theatre nurses, depending on which technique seen as the most appropriate.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

Storm water causes a number of problems in our country, particularly in city environment with its surfaces of non-absorbing ground materials. At heavy rain falls there are floods due to lack of capacity in the drain system when meeting heavy water masses over a short time. When the drain system is overloaded huge water masses reach the recipient untreated and there causing disturbances in the aquatic ecosystem. Due to emissions from mainly traffic, industries and other human activities the storm water is polluted. Earlier the problem used to be solved technically, by increasing the capacity of the tubes and by construction of reservoirs to delay the floods peaks.

Storm water management has become a more important matter as urban areas are expanding and natural areas are being exploited. As nature landscapes are being converted into hard surface areas storm water flow is affected both in terms of velocity and size. A flow increase can easily result in a flooding if the dimensions of the pipeline system are inadequate. Considering predicted upcoming climate changes, flooding?s may become more common in urban areas in the future.

Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.